5 Common Types Of Industrial Timber And Their Uses
One of the primary benefits of using industrial timber is that they are readily available. The primary difference between timber and industrial timber is that the latter is scientifically produced in factories. This makes them more durable and stronger than ordinary timber. Almost all experienced timber suppliers in Sussex let their customers choose from a wide variety of industrial timbers. They are available in various shapes and sizes so that you can choose one according to your industrial requirements.
Approaching Timber Suppliers In Sussex? Types Of Industrial Timber You Can Choose From
Veneers
Veneers are the thin layers of wood formed when the wood is cut in a rotary cutter using a sharp knife. The wood log is cut into very thin sheets by rotating them against a saw or sharp knife in the rotary cutter. Veneers are obtained by drying the thin layers of wood in the kiln. Few of the wood products made using veneers are block boards and plywood. They are considered to be a better option than solid wood as they are generally more stable and less likely to warp.
Plywood
Plywood is also known as thin wood and has numerous industrial uses. They are generally used to make ceilings, paneling walls, doors, partition walls and formwork for concrete. The plywood board is manufactured by placing numerous layers of veneers or thin wood one above the other. A suitable adhesive is used to join the successive layers of wood. Glue is applied between the layers and pressed in cold or hot conditions.
Fiber Boards
Vegetable fibers and wood fibers are generally used to make fiberboards. Since reconstructed wood is used to make them, they are usually more rigid. The fibers are boiled in hot water before transferring them into a closed vessel where pressure is applied. This explodes the wood fibers and the adhesive gets separated. Few common uses of fiberboards are wall paneling, flush doors, flooring material, ceilings, and partitions.
Block Board
Blockboard is another common type of industrial timber offered by companies engaged in timber supplies in Sussex. The core of the blockboard is made using wood strips. These strips are obtained from solid timber conversion leftovers which are glued together to make a solid structure. Timber manufacturers ensure that the width of the core is not more than 25mm. A few common uses of blackboards are paneling, railway carriages, partitions, marine, and river crafts.
Impreg Timbers
Impreg timbers are manufactured by fully or partly covering the timber using resin. Veneers or very thin layers of wood are dipped in resin (phenol-formaldehyde) solution. The voids in the consolidated mass and wood are filled up using a resin solution. Impreg timber is developed by heating the treated wood and consolidated mass at 150-160oC. Few names used to denote this industrial timber variety are sunmica, Formica and sungloss. They offer good resistance against electricity, weathering, moisture, and acids.
Since you are now aware of the common types of industrial timber and their uses, it’s time you approach a renowned timber supplier in Sussex.